CC2530F256RHAR cc2530 Module Development Board Serial Port Transparent Transmission

Note At least two CC2530 modules are needed to realize Z1gBee networking this product contains only one Two methods can be used Application method The bottom layer is implemented by the board you only do the application Use the firmware associated with the board In this way the board is a Z1gBee wireless serial port module the operation is as simple as operating the serial port you do not need to understand the complex Z1gBee protocol Development method Re develop the board and implement the bottom layer yourself Write your own Z1gBee communication protocol In this way you need CC Debugger etc you also need to learn and understand the complex Z1gBee protocol Serial port related Operation is as simple as operating the serial portSupport three kinds of serial port transparent transmission firmware coordinator router and terminalThe factory default configuration is a router by downloading the coordinator or terminal firmware it can be changed to the coordinator or terminal Support serial port to send big data packets and broadcast fast packet sendingSupport serial port download program firmware supports serial port bootloader serial port module required Support the host computer software to set working mode serial channel baud rate channel and other parametersOther Supports automatic networking at least one coordinator and one router are required for networking Real time monitoring of the signal strength between the coordinator routing and terminalWith