BAMILL 1pair Fiber Fusion Splicer Electrodes Rod for AV6471/AV6471A/AV6496A Equipment

Product description: brand new high quality Made of high-quality materials for durability 1 pair of fiber splicer electrodes for AV6471/AV6471A/AV6496A devices Applicable models: AV6471/AV6471A/AV6496A Welding service life over: 3000 Electrode replacement method: First make sure that the welding machine is turned off. Remove and release the protective cover of the electrode compartment Fix the upper electrode and remove the upper electrode. then release the top Connect the lower electrode and remove the lower electrode. Next install new electrodes. The steps are reversed to the following method Remove the electrode. You can do it in. The difference between the two Both electrode tips are required to be 2.6 +/- 0.2 mm. Finally during assembly do not touch the electrode tips Prevent electrode damage avoid electrode damage fall into the machine. After changing the electrode the arc position should be Calibrated. Electrode cleaning and arc calibration: After installing the electrode turn on the power switch of the welding machine. implement. After the welding machine enters the initial screen press the menu key to enter the first level menu. Move the cursor to find the machine maintenance personnel enter the cleaning electrode After confirmation the machine will automatically discharge and clean the aging electrode. Install the cut left/right fiber move the fiber to find the arc position item cursor and hold the position between the three point and single line optics The tip of the fiber and the two electrodes pass through. The discharge test will be performed by the machine and can be adjusted according to the actual situation. Finally press the menu key to exit in. Package list: 1 pair * fiber optic electrode Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data.