40W/50W/60W Glass CO2 Laser Tube for CO2 Laser Cutter Engraving Cutting Machine

Description: The product is featured as small size and good model, higher power rate compared with the laser tube of similar length and longer service time, which is suitable for laser marking, laser cutting and laser engraving. Specification: Rated Power Length Diameter 40W 700mm 50mm 50W 800mm 50mm 60W 1250mm 60mm Features: 1. CO2 laser tube is mainly used for laser engraving machine, laser marking machine,laser engraving machine, laser cutting machine, is the core component light, and can be carved and cut acrylic, cloth, leather, bamboo, wood, engraving, etc. 2. It is excellent in laser spot mode, has strong laser energy, and a long service life. Precautions for Use and Maintenance: 1. Do not connect the positive and negative poles of the line (the end where the light appears is the negative pole). 2. The cooling water pipe should be connected. The connection method is to enter the water from the negative electrode end, and the water is discharged from the positive electrode end, and it conforms to the principle of going in and out, and the interface can not leak water. Before use, the water in the water reservoir must be sufficient. After the water is passed, the cooling tube must be free of air bubbles before use. It must be observed before each use. 3. It is recommended that the user add an automatic detection device to the laser tube cooling water circulation system to prevent the laser tube from malfunctioning due to water cut and overheating during operation. 4. Always check the output mirror of the negative electrode for dust and oil stains. If it is, please scrub it with degreased cotton and ether, otherwise it will affect the power and light spot. Package Included: 1 x CO2 Laser Tube (Packed In A Wooden Box)